Other

BB30 Spacer - 15.46mm

Flat Mount Disc Caliper Bracket Bolts

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

- Chainring bolts for Rival D1 2x cranks

GXP Shield and Wave Washer

- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

- GX DH/X01DH 7 Speed Rear Derailleur B-Bolt and Limit Screw Kit Hex5

Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken

- SRAM, Road pulleys, 11.7515.060.000

The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.

REAR DERAILLEUR OUTER LINK KIT RED XPLR AXS (UPPER AND LOWER OUTER LINK WITH BUSHINGS INCLUDING BOLTS) Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

MTB trigger shifter spare parts for repairs and replacement

Disc Brake Adaptors - Includes Stainless Bolts

- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5

- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1

- X01 Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5

GX Eagle Rear Derailleur Pulley Kit

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included

Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.

Replacement hoods for SRAM hydraulic shifter/brake levers.

Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers

SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups

To complement both Eagle 90 and 70, we sought to design a mechanical dropper lever that not only matched our Stealth brakes and Transmission shifters but offered optimized performance as well. Compatible with most mechanically actuated dropper posts, our dropper lever features intuitive ergonomics based on Transmission shifting. And for a completed cockpit aesthetic, it features cable routing that is designed to pair with SRAM Stealth brakes, resulting in clean cables left and right. Features - Shared design language with Eagle Transmission and Stealth Brakes to provide the cleanest looking and performing cockpit. - Cockpit tidying Shift Housing/Brake Hose clip included. - Pull ratio compatible with most mechanically actuated dropper posts. - Lightweight, robust design. - MMX compatible with three mounting options for best compatibility with E-MTB controls.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes