Lighting

Product details - Replacement mounting strap for Bontrager Glo and Ember lights - Silicone strap allows for quick installation and removal of light - Fits 22.2 – 31.8mm handlebars, seatposts, and much more

- Replacement aero mount for Numen light

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts

Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g

Extension Cable - Length: 100cm - Temperature: -20 - 60 degrees - Extension Cable for MONTEER 3500/900s/902s/900

Magicshine tool-free helmet mount MJ-6058, compatible with most bike lights with the o-ring type mount. Attach your Magicshine Bike Light to your helmet. Adding a helmet mounted light to your existing bar mounted bike lights gives an enhanced night time riding experience. By positioning an extra light higher up you get added perspective, enabling faster and more technical riding on the mountain trails. The slightly larger attachment gives you some discretion over the angle of beam from your light head, meaning you can use the light for many other activities not just night riding. A Velcro strap allows the helmet mount to be fitted and removed from your vented helmet within seconds.

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.

Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement

Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

Recon-E Light to Shimano motor unit connector cable.

Garmin bike handlebar mount for almost all Garmin compatible devices, works on Magicshine Allty 1000/2000(default), Allty 300/500 and lights with Garmin adapter installed, such as most of the 9 series, Eagle series, Bluetooth series and all Monteer bike lights. Hard plastic base with sturdy straps, a hex key(included) is needed to secure it onto the handlebar, once installed, it's non-adjustable, neither vertically nor horizontally. Two extra straps are included that will work with handlebars of most sizes(up to 41mm) including Aero bars. This mount can easily support Garmin devices of moderate weight including bike lights, cellphones, GoPro cameras etc. For compatibility with 900/902/906/900B/902B/906B bike lights, a Garmin adapter is required.

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

E-Cable For BOSCH - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

All NiteRider headlight mounts deliver rock solid mounting, but for those who demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. System Compatibility: - Lumina Series - MiNewt Cordless Series - Mako Series

Spare mount for the Recon HL series of headlights

Extend your light's runtime with Serfas' BAT-ADT Replacement Battery. It allows up to 4 times the runtime when used in place of internal battery and connected to BAT-4 (sold separately).

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

Recon-E Light to Bosch motor unit connector cable.

Perfect for E-city and E-trekking bikes, the fork mount puts the light directly on the fork crown above the mudguard, allowing space for a bag or shopping basket on the front of the handlebar.

- 16 COB LEDs delivers 120 candela of intensity with over 180-degrees of visibility - 2 steady beam modes and 3 flash modes for variable use and run time - Power and recharge indicator light displays current power or recharge status (Green 100-30%; Red 30-0%) - IPX4 water resistant - Micro-USB charging port with micro-USB cable included - Rubber O-ring and different shapes of mounting shims for tool-free installation on most seat posts - Integrated mounting clip for backpacks and bags - ANSI Certified

Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

Safely ride into the night with light sets from Bontrager, all featuring 270 degrees of visibility and steady and flash modes. - Set includes: Glo headlight, Ember taillight and 2 silicone straps - Each set includes lights with focused optics and over 270 degrees of visibility Glo Instantly add safety lighting with the Glo headlight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact, bright and stylish lights can be run in either steady or flashing modes and provide over 40 hours of run time. Elastic bands add versatility. - Be seen with Bontrager's focused optics and over 270 degrees of visibility - One bright white and environmentally-friendly LED - Features steady and strobe-flash modes - Run time of 40+ hours via two 2032 batteries (included) - Includes silicone strap for quick installation on handlebars, seatposts, and more Ember Instantly add a burst of visibility to the rear of your bike with the Ember taillight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact and stylish lights provide key visibility with steady or flashing modes and provide over 40 hours of run time. Ember Multi-Use Lights include two CR2032 batteries and an elastic strap for attachment to a variety of surfaces including helmets. - Be seen with Bontrager's focused optics and over 270 degrees of visibility - Features steady and strobe-flash modes - Run time of 45+ hours via two 2032 batteries (included) - Includes silicone trap for quick installation on handlebars, seatposts, compatible shoes, and more

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Multi-purpose out-front style bike mount, Magicshine MJ-6272 is a durable, lightweight bike mount compatible with a variety of devices. - Default mount for Magicshine Monteer 6500 and Monteer 8000s - CNC aluminum alloy body, hardened, rigid, durable and light weight - Compatible with all Magicshine lights with Garmin base - Support for 31.8mm and 35mm bars - Support for Gopro devices or another GoPro to Garmin adapter

- 1 LED delivers 50 candela of intensity - 2 steady beam modes and 3 flash modes for variable use and run time - Power and recharge indicator light displays current power or recharge status (Green 100-30%; Red 30-0%) - IPX4 water resistant - Micro-USB charging port with micro-USB cable included - Rubber O-ring and different shapes of mounting shims for tool-free installation on most seat posts - Integrated mounting clip for backpacks and bags - ANSI Certified

Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual