$7.50 - $24.98
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Electra's Cruiser Aluminum Stem is a stable, solid replacement for your original equipment. Designed to work with a 1-inch headset, the Cruiser Stem is made from no-frills aluminum that keeps off the weight while maintaining strength where you need it.
Features a wide range of adjustment to dial in your fit. Ensure a proper fit for the best ride experience. Product details - High-quality alloy adjustable stem is quill-style, for use with threaded forks - Seamless integration with Bontrager's Elite Blendr mount kit, sold separately - Features 64 degrees of angular adjustment - 50mm stack height adjustment allows for a wide-range of fit options - Quill stem length is 180mm
- 3D forged 6061 aluminum alloy body with oversize box cross-section - 46mm wide 6061 alloy faceplate - Steel hardware - Not OD2, regular 1-1/8"
Ritchey's Adjustable Road Stem is a super-versatile stem ready for any riding style. The angle can be adjusted from plus-45 degrees to negative-45 degrees and anywhere in-between, allowing you to fine-tune the exact bar placement you're looking for whether you want to get down into a super-aero position or sit up in a back-friendly upright position. Plus, it's made of forged aluminum for light weight and excellent durability.
Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro! - Low-Near = 17° rise / 77mm length - Low-Far = 100° rise / 110mm length - Mid-Near = 50° rise / 67mm length - Mid-Far = 45° rise / 110mm length - High-Near = 80° rise / 67mm length - High-Far = 75° rise / 110mm length
- Adjustable stem to fit RideDash EVO display - Ahead style
An oversized 35mm stem that is lightweight and durable for the burliest mountain riders. Oversized and in control Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from 6061-T6 3D aluminum, this finely finished stem provides the increased strength of the latest mountain-specific bar diameter at the lightest weight possible. Product details - Pro-level quality stem in oversized 35mm clamp diameter for increased strength and minimal weight - Forged from 6061-T6 3D aluminum - Laser etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects the frame from impacts by fork and handlebars by eliminating over-rotation of bars - High-strength corrosion-resistant steel bolts ensure the freshest look for longer - Available in a wide range of sizes for today's mountain rider - Safe for carbon bars
Featuring purpose-engineered shaping, Giant’s all-new aluminum Contact SL stem is stiff, strong and ultra-light. Available in 0° and ±10°angles and eight lengths from 70 to 140mm brings superior performance to a wide range of riders. VERSATILE FIT Available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±0°/ ±10°), the Contact SL stem is perfect for any ride experience. - Super stiff, ultra-light aluminum - Compatible with all Giant OD1 and OD2 steer tubes - Integrated silhouette from stem to cone spacers - Compatible with Giant's Contact SLR/SL computer mount
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
- Lightweight, 3D forged, 2014 aluminum alloy - Proprietary Stealth recessed cable routing system enhances aerodynamic performance - Oversize box-section increases torsional stiffness with tuned vertical compliance
Features - Material: Ultra-light Aero carbon composite - Length: 70mm / 80mm / 90mm / 100mm / 110mm / 120mm - Fit: 31.8mm (OD2), shim 28.6mm (1 1/8") steerer tube - Extra: Titanium hardware, +/-8° adjustable rise - Weights: 135g, 138g, 141g, 146g, 149g, 154g
ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°). FEATURES - Compatible with all Giant OD1 and OD2 head tubes sizes - Available in ±10° and ±20° angles - Available in eight lengths from 70 to 140mm - Purpose-engineered shaping achieves maximum stiffness and lowest weight - Integrated aero silhouette from stem cap to spacers
- Ultralight, one-piece full-composite construction fine-tuned for vibration damping and aerodynamics - Dual radius drop and aero top profile for maximum aerodynamics - 12 width/length combinations meets most performance fit needs - OverDrive 2 provides improved steering stiffness - Compatible with the new Contact SL Aero Clip-on system - Steerer diameter: 1-1/4-inch, compatible with 1-1/8-inch with adapter (sold separately)
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
An integrated bar and stem combo that cleanly and securely holds cables for a refined look and added aerodynamics. Save watts, ride faster This aero upgrade cleans up your cockpit by securely storing cables for a refined look and free speed. The Aeolus RSL bar/stem combo is proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor. It's light, fast, easy to install, and Blendr-compatible for seamless integration of your light or Garmin. Product details - OCLV Carbon construction is ultra-light, compliant, and durable - Integrated bar/stem design improves aerodynamics and saves weight - Proven in the wind tunnel to save 7 watts, making it 10 % faster than its predecessor - Integrated cable management system held secure with M4 hex bolt, 5Nm torque - Variable Radius Compact (VR-C) design allows longer reach and drop - Includes Blendr mono and duo bases with mounts for Ion light and Garmin computer - Approved for use with carbon or alloy steerer
Page 1 of 1