Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bike Tools & Workstands

Park Tool Tire Lever Set
$3.50
Park's Tire Lever Set is made of high-strength nylon for long life and to prevent tube or rim damage. The levers make tire removal easy and won't pinch tubes. Everyone should have a set of these reliable levers.
Park Tool Cast Aluminum Tool Tray
$6.50
Park's Cast Aluminum Tool Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools, lubes and small parts close at hand. It has deep sides so your small items stay put, a holder for cans of lube and slots for holding your tools. This handy tool fits Park's PRS-2, PRS-3, PRS-6, PRS-13, PCS-1, PCS-1 and PCS-4 repair stands manufactured after June 1996 (stands sold separately).
Park Tool Replacement Chain Tool Pin
$6.59
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Park Tool Replacement Chain Tool Pin (2-Pack)
$6.90
Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.
Park Tool Double-Ended Cone Wrench
$7.49
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Shimano TL-EW02 Di2 E-Tube Wiring Plug Tool
$7.49
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
Park Tool Gear Clean Brush
$7.99
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool Hex Wrench (8mm)
$7.99
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool Shop Screwdriver
$7.99
Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.
Park Tool Metric Wrench
$8.49 - $14.99
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.
Park Tool FR-1 Freewheel Remover
$8.90
The Park FR-1 Freewheel Remover fits Shimano freewheels made since 1985. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Pro Y-Wrench
$8.90
• Y-shaped wrench with 3 tools • Available in 3 versions: Hex S (2, 2.5, 3mm), Hex M (4, 5, 6mm) and Torx (T20, T25, T40)
Crank Brothers Speedier Lever
$8.99
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
Park Tool FR-4 Freewheel Remover
$9.90
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool Spoke Wrench
$9.98 - $14.99
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
Park Tool Derailleur Clutch Wrench
$9.99
Park Tool's Derailleur Clutch Wrench is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.
Park Tool Tire and Tube Repair Kit
$9.99
Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).
Stan's NoTubes Core Remover
$11.49
Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire.
Park Tool Four-Sided Spoke Wrench
$11.99
Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.
Park Tool Hex Wrench (11mm)
$11.99
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool Hex Wrench (12mm)
$11.99
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool MWF-2 Metric Flare Wrench
$11.99
This 7mm and 9mm flare wrench is used to open and close compression nuts/fittings on hydraulic systems. The MWF-2 features angled heads for easy access and unique, semi-box openings to reduce the risk of damage to compression fittings.
Park Tool Cassette Lockring Tool with 5mm Guide Pin
$12.49
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Bontrager TLR Sealant Injector
$12.50
- Easily and neatly inject sealant into your tires or tubes - Presta and Schrader compatible
Bontrager Comp Multi-Tool
$12.99
Everything you need Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25 - Alloy sides for a sleek lightweight design - Material: Steel
Park Tool Metric Flare Wrench
$12.99
Park Tool's 8mm and 10mm Metric Flare Wrench is used to safely open and close the compression nut on hydraulic brake calipers and levers. The MWF-1 features angled heads for easy access, and unique, semi-box openings to reduce the risk of damage to the compression nut and brake line.
Park Tool Ratcheting Metric Wrench
$12.99 - $19.99
World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
Park Tool Shop Cone Wrench
$13.00 - $13.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Park Tool Bottom Bracket/Cassette Tool (Campagnolo)
$13.99
Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.
Park Tool CM-5.2 and CM-5 Rebuild Kit
$13.99
The Cyclone Chain Scrubber brushes are replaceable. The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks.
Page 1 of 8 Next page